AISI 1010 Steel/S10C

Product Name:
AISI 1010 Steel/S10C

Material:
AISI 1010 Carbon Steel/S10C

Processing available:
Kaiping, slitting, cold rolling, quenching, and tempering

Huaxia is a professional manufacturer and exporter that is concerned with development and production.

Our advantages:
1. More than ten years of export experience
2. Rich products
(carbon steel, stainless steel, aluminum)
3. Timely response within 12 hours

Welcome to send us inquiries directly

Details for AISI 1010 Steel/S10C：

AISI 1010 carbon steel/S10C is a kind of steel material with good plasticity and toughness, easy to be formed by cold and hot working, good machinability after normalizing or hard working, good weldability, no temper brittleness, and poor hardenability and hardenability.

It is used to manufacture parts with low stress and high toughness, such as automobile bodies, containers, deep stamping vessels, tubes, gaskets, etc. It can be used for cold rolling, cold punching, cold heading, cold bending, hot rolling, and other processes, as well as carburizing parts with low central strength, carbonitriding parts, etc

This standard specifies the size, shape, weight, technical requirements, test methods, inspection rules, packaging, marks, and quality certificates of high-quality carbon structural steel hot-rolled steel sheets and strips. This standard applies to hot-rolled high-quality carbon structural steel sheets and ribbons with a thickness not greater than 100 mm and a width not less than 600 mm.

Standard – Chemical requirements for AISI 1010 Steel/S10C：

component	C	Si	Mn	P	S	Cu	Ni	Cr
minimum value	0.07	0.17	0.35	–	–	–	–	–
maximum value	0.13	0.37	0.65	0.035	0.03	0.25	0.3	0.15

Standard – Requirements for mechanical properties of
AISI 1010 Carbon Steel/S10C:

category	yield strength	tensile strength	Elongation	Reduction of area	1010 Steel Hardness	Decarburized layer
	Rm	Rm	%	%	Hot Rolled	both sides
	（Mpa）	（Mpa）
minimum value		335	32
maximum value				55		0.904
Number

Mainstream manufacturers of AISI 1010 Carbon Steel/S10C:

Meishan Steel, Anshan Iron and Steel, Taiyuan Iron and Steel

Cold rolled AISI 1010 Steel available:

Thickness:

0.2mm~6.0mm

Width:

15mm~620mm or 1000mm~1250mm

Hardness:

cold and hard (hrb89~hrb 105)
Soft state (hrb75~ hrb 85)

Surface:

blue, black, polished, bright, mirror

AISI 1010 Steel Heat Treatment available :

Thickness:

2.0mm~6.0mm

Width:

15mm~620mm or 1000mm~1250mm

Hardness:

delivery status of conventional steel mills (hrb80~hrb 90)

Comparison table of different standards for AISI 1010 Steel/S10C:

Chinese	Germany		France	International standard	Japan	Sweden	England	America
GB	Germany		NF		JIS	SS	BS	America
	DIN	W－Nr.		ISO				ASTM	UNS
10#			XC10		S10C			SAE1010

Applications of AISI 1010 Carbon Steel/S10C:

AISI 1010 carbon steel/S10C steel has good plasticity and toughness, is easy to be formed by cold and hot processing, has good machinability after normalizing or cold processing, excellent weldability, no temper brittleness, and poor hardenability and hardenability. Manufacture parts that require little force and high toughness.

AISI 1010 carbon steel/S10C is used in parts with low bearing capacity, such as automobile body, container, deep drawing vessel, gasket, etc., and can be used in cold rolling, cold stamping, cold heading, cold bending, hot rolling and other processes Forming can also be used as carburized parts, carbonitrided parts, etc. with low core strength.

（Quality Certificate of AISI 1010 carbon steel/S10C – Cold Rolled Steel Plate）

The differences between ASAI 1010 Steel/S10C & C20 / S25C / 1020:

1. In terms of chemical composition, the carbon content is different.

The average carbon content of AISI 1010 carbon steel/S10C steel is 10 ten thousandths, and that of C20 / S25C / 1020 steel is 20 ten thousandths.

2. Due to the different carbon content, their mechanical properties are different.

With the increase in carbon content, the strength and hardness of carbon structural steel increase correspondingly, and the plasticity decreases correspondingly. AISI 1010 carbon steel/S10C and C20 / S25C / 1020 belong to low carbon steel, with low strength and hardness and good plasticity.

3. Compared with C20 / S25C / 1020 steel, AISI 1010 carbon steel/S10C steel has lower strength and hardness; The plasticity and sewing ability of AISI 1010 carbon steel/S10C steel is better than that of C20 / S25C / 1020 steel, which means it is softer.

Next： low carbon steel – 1020/C20/S20C

AISI 1010 Steel/S10C

Details for AISI 1010 Steel/S10C：

AISI 1010 carbon steel/S10C is a kind of steel material with good plasticity and toughness, easy to be formed by cold and hot working, good machinability after normalizing or hard working, good weldability, no temper brittleness, and poor hardenability and hardenability.

Standard – Chemical requirements for AISI 1010 Steel/S10C：

Standard – Requirements for mechanical properties of
AISI 1010 Carbon Steel/S10C:

Mainstream manufacturers of AISI 1010 Carbon Steel/S10C:

Meishan Steel, Anshan Iron and Steel, Taiyuan Iron and Steel

Cold rolled AISI 1010 Steel available:

Thickness:

Width:

Hardness:

Surface:

AISI 1010 Steel Heat Treatment available :

Thickness:

Width:

Hardness:

Comparison table of different standards for AISI 1010 Steel/S10C:

Applications of AISI 1010 Carbon Steel/S10C:

The differences between ASAI 1010 Steel/S10C & C20 / S25C / 1020:

1. In terms of chemical composition, the carbon content is different.

The average carbon content of AISI 1010 carbon steel/S10C steel is 10 ten thousandths, and that of C20 / S25C / 1020 steel is 20 ten thousandths.

Related Posts:

Get In touch

Request A Free Quote

AISI 1010 Steel/S10C

Details for AISI 1010 Steel/S10C：

AISI 1010 carbon steel/S10C is a kind of steel material with good plasticity and toughness, easy to be formed by cold and hot working, good machinability after normalizing or hard working, good weldability, no temper brittleness, and poor hardenability and hardenability.

Standard – Chemical requirements for AISI 1010 Steel/S10C：

Standard – Requirements for mechanical properties of AISI 1010 Carbon Steel/S10C:

Mainstream manufacturers of AISI 1010 Carbon Steel/S10C:

Meishan Steel, Anshan Iron and Steel, Taiyuan Iron and Steel

Cold rolled AISI 1010 Steel available:

Thickness:

Width:

Hardness:

Surface:

AISI 1010 Steel Heat Treatment available :

Thickness:

Width:

Hardness:

Comparison table of different standards for AISI 1010 Steel/S10C:

Applications of AISI 1010 Carbon Steel/S10C:

The differences between ASAI 1010 Steel/S10C & C20 / S25C / 1020:

1. In terms of chemical composition, the carbon content is different.

The average carbon content of AISI 1010 carbon steel/S10C steel is 10 ten thousandths, and that of C20 / S25C / 1020 steel is 20 ten thousandths.

Related Posts:

Get In touch

Request A Free Quote

Standard – Requirements for mechanical properties of
AISI 1010 Carbon Steel/S10C: